SEPLITE® LSA18S
SEPLITE® LSA18S is a polymeric adsorbent with strong acid groups. Its adsorptive properties came from its macroreticular pore structure, high surface area, specially designed pore size distribution and aromatic nature of its surface.
The high surface area and strong mechanical strength of this resin makes it ideal for food and pharmaceutical applications.
Sunresin adsorbents was produced fully in accordance with the FDA (US Food & Drug Administration), which stated adsorbent polymer can be used for being used in food contact applications.
The same resins were meeting the regulations prescribed under "Council of Europe resolution AP (97) 1 on ion exchange and adsorbent resins used in the processing of food stuffs", which stated when well pre-treated, adsorbent resins was suitable for used in food applications.
SEPLITE® LSA18S Polymeric Adsorbent Physical and Chemical Characteristics:
| Matrix | Crosslinked polymer |
| Physical Appearance | White spheres |
| Particle Size (mm) | 0.315-1.25 (95%) |
| Moisture (%) | 48-58 |
| Bulk density (g/l) | 750-850 |
| Density (g/l) | 1150-1250 |
| Total capacity (Eq/L) | 2.5 |
| Surface area (㎡/g) | ＞300 |
| Temperature limitation | 0-110℃ |
| PH range | 0-14 |
SEPLITE® LSA18S Polymeric Adsorbent Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
-
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Contact Us
