SEPLITE® LAR714
SEPLITE® LAR714 is high arsenic selectivity resin specially developed for potable water and other solutions. By regenerated use, it could serve a very long-life cycle.
LAR714 contains iron oxide in formulation to be preferred selective to arsenic. It is featured by its outstanding operation capacity and long service life. Due to its chemical feature, it is ideal for using in neutral and alkali applications.
This resin was regenerated with Acid, so it was not suggested to use this resin in acidic conditions. LAR714 is supplied in bead form and suitable for using in small cartridges and big industrial resin columns. For normal usage, it is similar to other conventional ion exchange resins.
SEPLITE® LAR714 Water Treatment Resins Physical and Chemical Characteristics:
| Matrix Structure | Cross-linked polystyrene |
| Shipped form | Neutral |
| Physical Appearance | Brownish Red Spheres |
| Particle size (mm) | 0.315-1.25 |
| Moisture content (%) | 50-60 |
| Total Capacity(eq/L) | ≥1.5 |
| Bulk Density ( g/l) | 750-850 |
| Density ( g/l) | 1180-1280 |
| Whole beads Count (%) | ≥95 |
| Arsenic capacity (g/L) | 0.5-4 |
SEPLITE® LAR714 Water Treatment Resins Key features and benefits:
-
High operating capacity
-
Good kinetic performance
-
Long lifetime
SEPLITE® LAR714 Water Treatment Resins Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
-
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
All information set forth herein is for informational purposes only. This information is general descriptive(introductory) information of SUNRESIN and its related products, technologies and services. Neither shall constitute the guarantee of SUNRESIN and its affiliates to products, technologies and services in specific fields and specific application conditions results, unless otherwise expressly noted. SUNRESIN and its affiliates assumes no obligation or liability for the information in this document. Customer is responsible for judging whether the information is appropriate for Customer's concrete demand and are obliged to understand whether the use of these products, technologies and services is permitted by the laws and regulations of their countries and relevant regions. Unless expressly stated, no freedom from infringement of use any patent or trademark or intellectual property rights owned by SUNRESIN or its affiliated companies under this document is to be inferred.
Contact Us
