SEPLITE® MB10 EDM
SEPLITE® MB10 is a ready to use mixed bed resin, consisted of strong acid cation resin and strong base type 1 anion resins
The resins were prepared with fixed ratio, with the aim of producing high quality purified water.
It could be loaded either in small cartridges and big industrial resin columns.
By using this mixed bed resin, projects requiring high demineralized water and low silica, TOC could be handled.
This resin is widely used in EDM application.
SEPLITE® MB10 EDM Mixed Bed Resin Physical and Chemical Characteristics:
| Physical and Chemical Characteristics | |
| Matrix Structure | Poly styrene Crosslinked DVB |
| Physical Appearance | Mixture of white to yellow spheres |
| Cation/Anion ratio | 1:1 |
| Function group | Sulphonic acid and trimethylammonium |
| Shipping form | H+/OH- |
| Particle range | 0.315-1.25mm (98%) |
| Total working capacity | 0.6eq/L |
| Moisture | 57-67% |
| Bulk Density | 700-770g/l |
| Temperature | â?0â?/td> |
SEPLITE® MB10 EDM Mixed Bed Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0â?in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.
SEPLITE® and Monojetâ?are registered trademarks of Sunresin New Materials Co. Ltd., Xi'an
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN directly.
Contact Us
