SEPLITE® CM2850 macroporous chromatographic resin
SEPLITE® CM2850 is a macroporous, strong acid cation exchange resin. It has an excellent uniformity of particle size mainly combines with chromatographic separation process (SMB, SSMB), widely used in the separation and purification of amino acid fermentation liquid, sugar etc.
SEPLITE® CM2850 Macroporous Chromatographic Resin Physical and Chemical Characteristics:
|
Matrix |
Polystyrene - DVB cross-linked |
|
Functional Group |
-SO32- |
|
Type |
Macroporous |
|
Particle Size (mm) |
0.30-0.40 |
|
Uniformity Coefficient |
≤1.1 |
|
Ionic Form |
Na+ |
|
Total Capacity (eq/ℓ) |
≥1.0 |
|
Water Content (%) H+ |
60-70 |
|
Shipping weight (g/l) |
720-820 |
|
Density (g/l) |
1150-1250 |
|
Maximum Operation temperature (°C) |
120°C |
|
PH |
5-14 |
SEPLITE® CM2850 Macroporous Chromatographic Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0 ℃ in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wet and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd.
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Contact Us
