SEPLITE® LSC688 Macroporous Strong Base Anion Resin
SEPLITE® LSC688 is a strong base anion resin, macroporous type 1.
Thanks to its macro porous structure, it is specially used in precious metal recovery, and iron removal from hydrochloric pickling bath. It has the advantages of high operating capacity and high mechanical strength.
SEPLITE® LSC688 Macroporous Strong Base Anion Resin Physical and Chemical Characteristics:
Matrix Structure | Macroporous Polystyrene DVB |
Functional group | Quaternary Ammonium, Type 1 |
Shipping form | Cl- |
Physical Appearance | Ivory to light yellow spheres |
Particle size (mm) | 0.70-2.00 |
Moisture content (%) | 50-60 (Cl- Form) |
Total Capacity(eq/L) | â?.2 |
Bulk Density ( g/l) | 650-730 |
Density ( g/l) | 1060-1100 |
Whole beads count (%) | â?5 |
Uniformity coefficient | â?.6 |
SEPLITE® LSC688 Macroporous Strong Base Anion Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0â?in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojetâ?are registered trademarks of Sunresin New Materials Co. Ltd.
â¢This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Contact Us
