SEPLITE® Monojetâ?MC3600
styrene-divinylbenzene"
PRODUCT INFORMATION
SEPLITE® Monojetâ¢MC3600
Uniform particle size, macroporous, Strong acid cation resin for Industrial demineralization and condensate polishing applications
SEPLITE® Monojetâ?MC3600 Ion Exchange Resin is a high-quality, high-capacity resin with uniform particle size designed specifically for use in condensate polishing mixed beds when high purity and water quality are required. It also can be used in demineralization of water for industrial steam generation.
With its outstanding mechanical strength and very good oxidative stability, it is suitable for the high flow rate demands of condensate polishing applications.
SEPLITE® Monojetâ?MC3600 Strong Acid Cation Resin Physical and Chemical Characteristics:
| Matrix Structure | Macroporous, Styrene-divinylbenzene | |
| Functional group | Sulfonic acid | Sulfonic acid |
| Shipping form | Na+ | H+ |
| Physical Appearance | Beige grey to brown spherical beads | Beige grey to brown spherical beads |
| Particle size (mm) | 0.63±0.05mm | 0.65±0.05mm |
| <0.3mm â?.1% | <0.3mm â?.1% | |
| â?.85mm â?.0% | â?.85mm â?.0% | |
| Moisture content (%) | 45-55 | 56-60 |
| Total Capacity(eq/L) | â?.8 | â?.6 |
| Bulk Density ( g/l) | 770-850 | 740-800 |
| Density ( g/l) | 1250-1280 | 1200-1250 |
| Whole beads count (%) | â?5 | â?5 |
| Uniformity coefficient | â?.1 | â?.1 |
| Volume change (Na+ to H+-) max. vol.% | 8% | |
| Operating temperature (max. °C) | 120 | |
| Operating pH | 0-14 | |
SEPLITE® Monojetâ?MC3600 Strong Acid Cation Resin Applications:
Industrial softening when treating water with high oxidant level and high temperature.
Condensate polishing.
Industrial demineralization.
SEPLITE® Monojetâ?MC3600 Strong Acid Cation Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0â?in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojetâ?are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Contact Us
