SEPLITE® SC130NS
SEPLITE® SC130NS is a high purity strong acid cation resin, gel type, with 8% cross-linkage. It is made without solvents such as DCE.
It is mainly designed for using in water softening, demineralization, dealkalization in industrial water and chemical processing applications.
Its excellent mechanical strength and good ion exchange kinetics make it a good general-purpose resin in different applications. Compared with other resins in market, this resin distinguishes itself for its long service life.
The resins are produced fully in accordance with the FDA (US Food & Drug Administration), also meeting the regulations prescribed under Resolution ResAP (2004) 3 on ion exchange and adsorbent resins used in the processing of foodstuffs.
Please follow our start-up recommendations which is available upon request, when using our products in food applications.
SEPLITE® SC130NS Non-solvent resin Physical and Chemical Characteristics:
| Matrix Structure | Polystyrene Crosslinked with DVB |
| Functional group | Sulfonic acid |
| Shipping form | Sodium |
| Physical Appearance | Dark brown to black Spherical beads |
| Particle size (mm) | 0.315-1.25 |
| Moisture content (%) | 43-48 |
| Total Capacity(eq/L) | â?.0 |
| Bulk Density ( g/l) | 780-870 |
| Density ( g/l) | 1240-1280 |
| Whole beads count (%) | â?5 |
| Uniformity coefficient | ï¼?.6 |
SEPLITE® SC130NS Non-solvent Resin Key features and benefits:
High operating capacity
Good kinetic performance
Long lifetime
Non-Solvent
SEPLITE® SC130NS Non-solvent Resin Applications:
Industrial water softening
Industrial water demineralization
Other applications please seek help from Sunresin
SEPLITE® SC130NS Non-solvent Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0â?nbsp;in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.
SEPLITE® and Monojetâ?are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Contact Us
