SEPLITE® Monojetâ?SC3100
Particle Size, NA+ Form"
SEPLITE® Monojetâ?SC3100 Ion Exchange Resin is suitable for using in industrial softening and demineralization applications especially for high performance and cost-effective requirements. Thanks to the uniform particle size and excellent chemical properties, this resin is able to yield high operating capacity and help users to save the chemical regenerant and rinsing water.
SEPLITE® Monojetâ?SC3100 is compatible with co-current or counter-current systems as well as mixed bed or single bed. The resin could be available in Na+ or H+ form.
The resins are produced fully in accordance with the FDA (US Food & Drug Administration), also meeting the regulations prescribed under Resolution ResAP (2004) 3 on ion exchange and adsorbent resins used in the processing of foodstuffs.
Please follow our start-up recommendations which is available upon request, when using our products in food applications.
SEPLITE® Monojetâ?SC3100 Cation Exchange Resin Physical and Chemical Characteristics:
| Physical and Chemical Characteristics | |
| Matrix Structure | Gel, Styrene-divinylbenzene |
| Functional group | Sulfonic acid |
| Shipping form | Na+ (H+ is also available) |
| Physical Appearance | Amber to dark brown translucent spherical beads |
| Particle size (mm) | 0.60±0.05mm |
| <0.3mm â?.1% | |
| â?.85mm â?.0% | |
| Moisture content (%) | 42-48 (Na+ Form) 50-55 (H+ Form) |
| Total Capacity(eq/L) | â?.0 (Na+ Form) â?.8 (H+ Form) |
| Bulk Density ( g/l) | 750-850 720-820 |
| Density ( g/l) | 1200-1250 1200-1250 |
| Whole beads count (%) | â?5 â?5 |
| Uniformity coefficient | â?.1 â?.1 |
SEPLITE® Monojetâ?SC3100 Cation Exchange Resin Applications:
Industrial softening
Industrial Demineralization
SEPLITE® Monojetâ?SC3100 Cation Exchange Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0â?nbsp;in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.
SEPLITE® and Monojetâ?are registered trademarks of Sunresin New Materials Co. Ltd., Xi'an
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE®resins, please contact SUNRESIN® directly.
Contact Us
