SEPLITE® Monojetâ?SC7100N H
SEPLITE® Monojetâ¢SC7100N H
Nuclear grade, Uniform particle size, Gel, Strong acid cation resin for water treatment in Nuclear power industry
SEPLITE® Monojetâ?SC7100N H Strong Acid Cation Resin Descriptions:
SEPLITE® Monojetâ?SC7100N H Ion Exchange Resin is a high-purity, high-capacity resin with uniform particle size designed specifically for use in nuclear power industry to remove cations for purification andcontrol the pH value.
This resin is supplied in H form and the ionic conversion rate of H form is up to 99%. There's special procedure imposed during the manufacturing in order to assure the highest demand of purity.
The resin can be used in primary water treatment, fuel pool purification and PWR steam generation blowdown etc.
SEPLITE® Monojetâ?SC7100N H Strong Acid Cation Resin Physical and Chemical Characteristics:
| Matrix Structure | Gel, Styrene-divinylbenzene |
| Functional group | Sulfonic acid |
| Shipping form | H+ |
| Ionic conversion H+ (%) | â?9 |
| Physical Appearance | Amber to brownish translucent spherical beads |
| Particle size (mm) | 0.65±0.05mm |
| Moisture content (%) | 48-55 (H+ Form) |
| Total Capacity(eq/L) | â?.9 (H+ Form) |
| Bulk Density ( g/l) | 780-850 |
| Density ( g/l) | 1200-1250 |
| Whole beads count (%) | â?5 |
| Uniformity coefficient | â?.2 |
| Purity (Metals in dry basis) | Na â?20 mg/kg |
| K â?20 mg/kg | |
| Fe â?20 mg/kg | |
| Cu â?5 mg/kg | |
| Co â?5 mg/kg | |
| Ca â?10 mg/kg | |
| Mg â?10 mg/kg | |
| Al â?10 mg/kg | |
| Hg â?20 mg/kg | |
| Heavy Metals (as Pb) â?10 mg/kg |
SEPLITE® Monojetâ?SC7100N H Strong Acid Cation Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0â?in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojetâ?are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Contact Us
