SEPLITE® MA920
SEPLITE® MA920 is a strong base type 2 anionic resin based on a macroporous polymer. It is best suited for demineralization of solution offering thanks to its type 2 active group high regeneration efficiency.
Due to its macroporous structure, it is especially resilient against organic matter and can be also used for their effective removal.
SEPLITE® MA920 Strong Base Resin Physical and Chemical Characteristics:
| Physical and Chemical Characteristics | |
| Matrix Structure | Macroporous Polystyrene DVB |
| Functional group | Quaternary Ammonium, Type 2 |
| Shipping form | Cl form |
| Physical Appearance | Ivory spheres |
| Particle size (mm) | 0.315-1.25 |
| Moisture content (%) | 42-52 (Cl- Form) |
| Total Capacity(eq/L) | â?.2 |
| Bulk Density ( g/l) | 650-750 |
| Density ( g/l) | 1000-1100 |
| Whole beads count (%) | â?5 |
SEPLITE® MA920 Strong Base Resin Key features and benefits:
High operating capacity
Good kinetic performance
Long lifetime
SEPLITE® MA920 Strong Base Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0â?in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.
SEPLITE® and Monojetâ?are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Contact Us
