SEPLITE® Monojetâ?SA8900N OH
SEPLITE® Monojetâ¢SA8900N OH
Nuclear grade, Uniform particle size, Gel, Strong base anion resin for water treatment in nuclear power industry
SEPLITE® Monojetâ?SA8900N OH Ion Exchange Resin Descriptions:
SEPLITE® Monojetâ?SA8900N OH Ion Exchange Resin is a high-purity, high-capacity type 1 strong base resin with uniform particle size designed specifically for use in nuclear loops. This resin is usually supplied in OH form and the ionic conversion rate of OH form is up to 95%. The resin can be used in primary water treatment, fuel pool purification and PWR steam generation blowdown, also can be used in mixed bed system.
SEPLITE® Monojetâ?SA8900N OH Ion Exchange Resin Physical and Chemical Characteristics:
| Matrix Structure | Gel, Styrene-divinylbenzene |
| Functional group | Quaternary Ammonium |
| Shipping form | OH- |
| Ionic Conversion OH- (%) | â?5 |
| Physical Appearance | Translucent spherical beads |
| Particle size (mm) | 0.55±0.05mm |
| Moisture content (%) | 40-45 (OH- Form) |
| Total Capacity(eq/L) | â?.3 (OH- Form) |
| Bulk Density (g/l) | 680-750 |
| Density (g/l) | 1100-1150 |
| Whole beads count (%) | â?5 |
| Uniformity coefficient | â?.2 |
| Purity (Metals in dry basis) | Na â?20 mg/kg |
| K â?20 mg/kg | |
| Fe â?20 mg/kg | |
| Cu â?5 mg/kg | |
| Co â?5 mg/kg | |
| Ca â?10 mg/kg | |
| Mg â?10 mg/kg | |
| Al â?10 mg/kg | |
| Hg â?20 mg/kg | |
| Heavy Metals (as Pb) â?10 mg/kg | |
| Cl â?250 mg/kg | |
| SiO2 â?10 mg/kg |
SEPLITE® Monojetâ?SA8900N OH Ion Exchange Resin Precautions:
Resins should be stored in sealed containers or bags where temperature was above 0â?in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.
SEPLITE® and Monojetâ?are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins, please contact SUNRESIN® directly.
Contact Us
